Material Testing Euipments
Bending Test Conical Mandrel BEND-6860
Buchholz Coating Hardness Tester BH-2815
Pulse Holiday Detector SPARK-1
Shore Hardness Test Stand
Leeb Hardness Tester T-D2
EMA Thickness Gauge
Digital Micro Vickers Hardness Tester TB-MCV-1A
Brinell Hardness Test Blocks HB
Digital Brinell Hardness Tester TB-B-C
Pencil Hardness Tester PH-3363
Measurement Platform (MP-1)
The MP-1 is designed to test the absolute thermal conductivity, thermal diffusivity and specific heat of solids, liquids, pastes and powders with the powerful combination of the transient plane source (TPS, ISO 22007-2) and transient hot-wire (THW, ASTM D7896-19) methods.
Best For Solids, Liquids, Pastes, and Powders
TPS-Temperature Platform
TPS-TP: 0 to 300 °C
Expanded: -160 °C | -50 °C | -20 °C | 0 to 300 °C
Uniformity: < 0.1 °C
THW-Temperature Platform
THW-TP: 10 to 200 °C
Extended for 200 °C: -15 °C | 0 °C to 200 °C
Extended for 300 °C: -160 °C | -45 °C | 0 °C to 300 °C
Measurement Platform (MP-2)
The MP-2 is a portable meter with unique selection of transient thermal conductivity sensors for a variety of applications, with a focus on primary measurements.
Best For Liquids, Solids, Pastes and Powders
Conforms to ISO and ASTM
Standard Test
Method
Multi-Sensor
Primary Measurement
Sensors
Transient Plane Source (TPS-2)
The TPS-2 transient plane source is designed to test the absolute thermal conductivity, thermal diffusivity, specific heat of solids, pastes, viscous liquids and powders.
Best For Solids, Pastes, and Powders
Transient Plane Source
Test Method
-75 °C to 300 °C
Temperature
Range
Transient Hot-Wire (THW-L1)
The Transient Hot Wire (THW-L1) is widely used for the accurate measurement of thermal conductivity, thermal diffusivity, and specific heat capacity of liquids, pastes, and powders.
Best For Liquids, Pastes, and Powders
ASTM D7896-19
Standard Test
Method
-150 °C to 300 °C
Temperature
Range
Up to 35 bar
Pressure
Range
HEAT FLOW METER (HFM-100/HFM-50)
The HFM-100/HFM-50 Heat Flow Meter is an easy-to-use technique for thermal conductivity and thermal resistance measurement.
Best For insulation products, construction materials, packaging, and assemblies
ASTM C518 | C1784 | ISO 8301
JIS A1412 | EN 12667 | EN 12664
Standard Test
Method
-20°C to 70°C
Temperature
Range
Guarded Heat Flow Meter (GHFM-01)
The GHFM-01 Guarded Heat Flow Meter is designed to test the thermal resistance and thermal conductivity of both homogeneous and heterogeneous materials.
Best For Metals, Polymers, Composites, and Pastes
ASTM E1530-19
Standard Test
Method
-20°C to 310°C
Temperature
Range
Transient Plane Source (TPS-3)
A transient plane source (TPS-3) for testing the thermal conductivity, thermal diffusivity and specific heat of solids, pastes and powders for customers with a limited budget.
Best For Solids, Powders and Pastes
Transient Plane Source
Test Method
-10°C to 80°C
Temperature
Range
Heat Flow Meter (HFM-25)
The HFM-25 is a portable heat flow meter for the measurement of thermal resistance and thermal conductivity of small samples of insulation and construction materials.
Best For small samples of insulation and construction materials.
ASTM C518 | ISO 8301
JISA 1412 | EN 12667
Standard Test
Method
-20°C to 30°C
Temperature
Range
Transient Hot-Wire (THW-L2)
The Transient Hot-Wire (THW-L2) is widely used for the accurate measurement of thermal conductivity for liquids and pastes.
Best For Liquids and Pastes
ASTM D7896-19
Standard Test
Method
-50°C to 100°C
Temperature
Range
Ambient Only
Pressure
Range
Transient Line Source (TLS-100)
The TLS-100 is a portable meter used to measure thermal conductivity and thermal resistivity of a variety of samples, including soil, rocks, concrete, and polymers.
Best For Soil, Rock, Concrete, and Polymers
ASTM D5334-22 | IEEE 442-2017
Standard Test
Method
-40°C to 100°C
Temperature
Range
Transient Line Source (TLS-100)
The TLS-100 is a portable meter used to measure thermal conductivity and thermal resistivity of a variety of samples, including soil, rocks, concrete, and polymers.
Best For Soil, Rock, Concrete, and Polymers
ASTM D5334-22 | IEEE 442-2017
Standard Test
Method
-40°C to 100°C
Temperature
Range
Guarded Heat Flow Meter (GHFM-02)
The GHFM-02 follows the trusted steady-state approach with the addition of a guard to limit the effects of lateral heat loss. This design allows the testing of a wide range of materials with low to medium thermal conductivity. Measures thermal conductivity and thermal resistance.
Best For Metals, Polymers, and Composites
ASTM E1530-19
Standard Test
Method
-20°C to 30°C
Temperature
Range
Thermal Effusivity Meter (TPS-EFF)
The Transient Plane Source-Effusivity (TPS-EFF) is a portable meter that uses a single-sided TPS sensor with test times of 2 and 10 seconds to understand the measurement of comfort with touch time fully.
Best For Textiles, Fabrics, and Solids
ASTM D7984-16
Standard Test
Method
-10°C to 50°C
Temperature
Range
